Thanks, Josh! Will try it. Happy Thanksgiving!ha. it's not hard to up your game considerably. i can make a batch in about 6 minutes start to finish... truly. and the difference in taste is dramatic. Hope you'll give it a shot...![]()
It is run by a group of enthusiastic Kaleidescape owners and dealers purely as a service to this community.
You can dismiss this box forever by clicking the "X" in the upper right corner of this message.
... but we strongly encourage you to register for a full account. There is no cost to register for a full account.
This box goes away for registered users.
Thanks, Josh! Will try it. Happy Thanksgiving!ha. it's not hard to up your game considerably. i can make a batch in about 6 minutes start to finish... truly. and the difference in taste is dramatic. Hope you'll give it a shot...![]()
Purchased a paragon 6 oz machine about 20 years ago and it’s been going strong. Cleaning it was never an issue or caused any heartache. We used many brands of the premade packs for the last 20 years but recently had to switch to our own kernals, coconut oil and flavacol due to my wife developing an allergy to something in the packs that recently changed ( she is allergic to dairy). Other than the convenience the popcorn tastes just as good as long as buy good ingredients.Now things are getting serious. I want to get a real popcorn maker for my theater. I am looking at the 8 oz options from Paragon likely either the Theater or Professional. I know they are quite a bit more expensive than some of the other machines out there, but the reviews all seem to say it is the last machine you will ever need to buy and worth it. What thoughts or experiences do you have with your popcorn machines for your theater and what size did you go with? I'm leaning towards a little bigger because it might get used for the occasional scout or neighborhood function as well.
For those with the popcorn machines, do you use the pre-portioned packs or make your own blend? Any recommendations there as well?
I don't understand this part... yes you definitely should not have the whole lid with stirring thing off of the pot when you put in the popcorn! But that's exactly why the whirley pop lid has ONE side of the top hatch that secures to the pot (doesn't open, secures the whole lid along with the two clips at the "top" and "bottom" of the lid ("bottom" meaning where the handle is, and that clip has a "thumb release" to make getting the lid off easier when it's clean up time) and the other flappy-side with a knob that has no clip-latch... it lifts up and down easily and is for adding your ingredients and for checking the state of the popcorn.For my test run, I made the mistake of putting both the oil and popcorn into the pan and then securing the lid to the pan.
I’m with you. I love the Popsmith and have zero complaints.My popsmith has never been soggy. When complete, I immediately crack the lid up and let out steam. There is quite a bit of steam that comes out with the top/side venting. But I also just make 1/3 cup of kernels, so maybe this minimizes what you are tasting. When done, put the whole thing in the dishwasher….
This guy can’t tell any difference…

Love the menu. Love it allI went a little overboard many years ago but it’s fun and easy and the popcorn with topping is amazing. Fan favorite.oh and the Nacho warmer has been an unexpected new favorite as well.
View attachment 9566View attachment 9567View attachment 9568
View attachment 9569
Josh you are the expert on this stuff for sure. I know you love the whirlypop but if I was to buy a BACK COUNTER machine what would be your recommendation for brand and model? Want a decent size one. Rough idea of what they run for? Up for any and all suggestionsWOW! Very impressive!
on the snacks displays and offerings!
The only SLIGHT/TINY improvement would be the popcorn machine orientation on that model. You've got what's called a "front-counter" popper model (graphics are on the opposite side of where typical access to the popped corn is) next to a "back-counter" topping machine dispenser (graphics and usage intended for the same side of the machine). Manufacturers typically offer their models of poppers and dispensers in both versions - front-counter and back-counter when you place an order.
"Back counter" models are meant either for user self-serve, or for staff-serve when the machine is behind the staff... ("on a back counter"). "Front Counter" machines are meant for visual display facing the customer but access on the opposite side of the machine for staff standing behind the front counter to access and serve the treat. But now we're into deep concession-device nerd topics here and I'm probably one of the few people who would ever notice it, and only after being completely blown away by the incredible equipment, graphics, and customization you've pulled off here!![]()
love it!We have signage identifying popcorn from the side as well. When this one goes I will take your advice though.
View attachment 9583
View attachment 9584
The Paragon machines are generally top quality, long lasting. Pretty sure the company is made up completely of laid off Maytag workers from when they closed a plant. These folks know mechanical appliances.Josh you are the expert on this stuff for sure. I know you love the whirlypop but if I was to buy a BACK COUNTER machine what would be your recommendation for brand and model? Want a decent size one. Rough idea of what they run for? Up for any and all suggestions![]()
![]()
www.paragonconcessions.com