I've just connected a Strato C with a Sony XW6000es projector and have noticed a very slight image flicker (pulsing) in the image of a few titles, notably the Grinch (2018) and Despicable Me. I haven't tested many beyond these yet. It's especially noticeable in the bright areas of the image, where if you look closely it's as if it is constantly adjusting the brightness of that area. I assumed this was a result of one of the 'dynamic adjustment' settings but turning those off had no effect. When I look at both of these titles in HDR on my Apple TV (same projector settings), there is no issue. The image doesn't 'pulse'. Any ideas what this may be? I know it's always difficult to troubleshoot without all the specifics but hoping someone may have encountered this before.
I've tried the usual swapping of HDMI's and also running straight HDMI from Strato to projector, bypassing the receiver. Same problem is present. I also redownloaded both titles to the server.
For context, I have another Strato C connected to a Sony VW5000es projector and do not experience this issue. However, that setup is running through a Lumagen processor.
I've tried the usual swapping of HDMI's and also running straight HDMI from Strato to projector, bypassing the receiver. Same problem is present. I also redownloaded both titles to the server.
For context, I have another Strato C connected to a Sony VW5000es projector and do not experience this issue. However, that setup is running through a Lumagen processor.