cinelife
Administrator
Staff member
Forum Administrator
Moderator
⭐️⭐️PATRON⭐️⭐️
Authorized Kaleidescape Dealer
I've been asked to gather info regarding the time it takes to switch sources when using the following components. (If you have these components and can time the switching, it would be very helpful.)
Sony 5000ES Projector
Lumagen Pro (any model, but 4242, and 4442 primarily)
Trinnov Altitude audio processor
Strato
Optional components
Co-Star Switch
Premiere Player
UHD Player
1. Cable info: Make, length, any extenders/signal boosters if used
2. When you first power "On" the projector, does Strato display immediately, if not, how long to see OSD?
3. When you select a UHD movie, how many seconds before image is displayed? Does audio play before video?
4. If you stop a movie playing from Strato, how long before the OSD appears in this chain: Strato>Co-Star>Lumi Pro>Altitude>Sony 5000?
5. What are the switching times when you switch from watching a BR movie on Premiere to a UHD/HDR movie, and the reverse, when changing from a UHD/HDR to BR movie. Question assumes you have a Co-Star.
6. Lastly, if you are not using the Lumagen, and are using the Trinnov Altitude as your switch, what switching times are you seeing under the circumstances indicated in the above questions.
Any other performance comments you would like to pass on....
Thanks guys, I'll be collecting this info over the next 2 weeks, and will close the thread when complete.
Jim
Sony 5000ES Projector
Lumagen Pro (any model, but 4242, and 4442 primarily)
Trinnov Altitude audio processor
Strato
Optional components
Co-Star Switch
Premiere Player
UHD Player
1. Cable info: Make, length, any extenders/signal boosters if used
2. When you first power "On" the projector, does Strato display immediately, if not, how long to see OSD?
3. When you select a UHD movie, how many seconds before image is displayed? Does audio play before video?
4. If you stop a movie playing from Strato, how long before the OSD appears in this chain: Strato>Co-Star>Lumi Pro>Altitude>Sony 5000?
5. What are the switching times when you switch from watching a BR movie on Premiere to a UHD/HDR movie, and the reverse, when changing from a UHD/HDR to BR movie. Question assumes you have a Co-Star.
6. Lastly, if you are not using the Lumagen, and are using the Trinnov Altitude as your switch, what switching times are you seeing under the circumstances indicated in the above questions.
Any other performance comments you would like to pass on....
Thanks guys, I'll be collecting this info over the next 2 weeks, and will close the thread when complete.
Jim