• Thanks for visiting the Kaleidescape Owners' Forum

    This forum is for the community of Kaleidescape owners, and others interested in learning about the system, equipment, services, and the company itself.

    It is run by a group of enthusiastic Kaleidescape owners and dealers purely as a service to this community.

    This board is not affiliated in any way with Kaleidescape, Inc.
    For official technical support, product information, or customer service, please visit www.kaleidescape.com

  • You are currently in "Guest" mode and not logged in with a registered account.

    The forum is free to use and most of the forum can be used by guests who are not registered....

    ... but we strongly encourage you to register for a full account. There is no cost to register for a full account.

    Benefits of registering for a full account:

    • Participate in the discussions! You must have a registered account to make posts on the forums. You will be able to start your own thread on a topic or question, or you can reply to other threads/discussions.
    • Use the "Conversation" feature (known as "private messaging" on other forums) to communicate directly with any of the other users here.
    • Access the Files area. The "resources" area of the forum contains many "Favorite Scene" and Script files that can dramatically increase the enjoyment of your Kaleidescape system. Go directly to great scenes in your favorite movies, created by other owners, and add automation to playback of your system with Scripts.
    • You won't see this annoying notice at the top of every screen!😊

    It's easy and free to register for the forum. Just click the "Register" button in the upper right corner of this page, and follow the instructions there.

Scripts

bogdandr

bogdandr

Active member
Hi, again a beginner question please,
Was not able to try but I saw in kserver scripts menu and I suppose from that part you are able to create macros that can be triggered 2 ways from home automation.

1.Is possible to create scripts in Strato 4K ultra 6tb?
2.Same question for Cinema One 2nd gen.

3. C1 2nd is able to pass trough audio (hdmi) (in order to benefit of Dolby atmos from the blurays that comes with this feature)?

Thank you
 
To get to the scripts tab, go to:

ip address/scripts

Where the ip address is that of your C1 or Strato (or Terra if you have one). Either way, the scripts tab is hidden and you need to enter the direct URL in your browser.

Andy


Sent from my iPhone using Tapatalk
 
andy said:
To get to the scripts tab, go to:

ip address/scripts

Where the ip address is that of your C1 or Strato (or Terra if you have one). Either way, the scripts tab is hidden and you need to enter the direct URL in your browser.

Andy


Sent from my iPhone using Tapatalk
Click to expand...
thank you
 
bogdandr said:
3. C1 2nd is able to pass trough audio (hdmi) (in order to benefit of Dolby atmos from the blurays that comes with this feature)?
Click to expand...
Yes, Cinema One 2nd Generation is able to pass bitstream audio, so Blu-ray discs that have Dolby Atmos (or DTS-X, etc.) will pass that bitstream to the processor for decoding.
 
andy said:
To get to the scripts tab, go to:

ip address/scripts

Where the ip address is that of your C1 or Strato (or Terra if you have one). Either way, the scripts tab is hidden and you need to enter the direct URL in your browser.

Andy


Sent from my iPhone using Tapatalk
Click to expand...
Trying to access C1 ip address/scripts it redirects me to ip address/movies and says nothing. Is there any other setting I have to enable before?
 
I cannot recall if the C1 supported scripts. Perhaps someone else here can chime in.

Andy


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top