• Thanks for visiting the Kaleidescape Owners' Forum

    This forum is for the community of Kaleidescape owners, and others interested in learning about the system, equipment, services, and the company itself.

    It is run by a group of enthusiastic Kaleidescape owners and dealers purely as a service to this community.

    This board is not affiliated in any way with Kaleidescape, Inc.
    For official technical support, product information, or customer service, please visit www.kaleidescape.com

    You can dismiss this box forever by clicking the "X" in the upper right corner of this message.
  • You are currently in "Guest" mode and not logged in with a registered account.

    The forum is free to use and most of the forum can be used by guests who are not registered....

    ... but we strongly encourage you to register for a full account. There is no cost to register for a full account.

    Benefits of registering for a full account:

    • Participate in the discussions! You must have a registered account to make posts on the forums. You will be able to start your own thread on a topic or question, or you can reply to other threads/discussions.
    • Use the "Conversation" feature (known as "private messaging" on other forums) to communicate directly with any of the other users here.
    • Access the Files area. The "resources" area of the forum contains many "Favorite Scene" and Script files that can dramatically increase the enjoyment of your Kaleidescape system. Go directly to great scenes in your favorite movies, created by other owners, and add automation to playback of your system with Scripts.
    • You won't see this annoying notice at the top of every screen!😊

    It's easy and free to register for the forum. Just click the "Register" button in the upper right corner of this page, and follow the instructions there.

    This box goes away for registered users.

LumaHDR

I ordered one to compare against my MadVR Envy Core MK2. I think they've made a lot of smart choices in hardware and software. They seem to be using an off the shelf SOC that is capable and power efficient, built a nice looking case around it, and are leveraging open source software and AI software development. For most scope theater users all they really need is aspect ratio detection, subtitle management, calibration and HDR tone mapping. And some may want 4K120 output either for HDMI sync reasons or gaming.

I think this could easily disrupt the video processor market. They have very significant cost advantages over the other platforms. Time will tell. All of that being said, I'm very happy with my Envy as well.
 
I asked the guy when he first posted on AVS about his Luma. It seemed a bit magical. I thought about it and set it aside, since the Lumagen does everything I want and need, and is proven for years to work with appliance-like reliability. I’m not sure I want to deal with testing something that has the same feature set but also has a lot of unknowns about performance and reliability. For me I tend to prioritize how close a component reaches 100% appliance level reliability. Which is why I had the UC3 on a PIP. It's been behaving since the latest beta update, but glitching out when I'm hosting Dad's Summer Film Festival isn't an option. But so far so good.

Plus there’s many hidden costs with adding a new component too, the time and effort to set it up, dial it in, and then wait for the all the connectors to get it to work with a universal remote and HA. Writing that out, I realize that’s part of the hobby. Part of me would rather waste my time customizing my cover art and waste my money on 12 $80 chunky cardboard boxes imported from Australia and the UK. Although a big part of that is refreshing delivery apps waiting for discs to ship. Hmmm!

Is Luma doing anything new that’s got you all interested?

IMG_8572.png
 
Last edited:
I feel pretty certain that my LRP will die some day, a lot sooner than I’ll be able to afford another one, and the LumaHDR is like a tenth the price of a new LRP. There are many things to figure out and I’ll need to spend at least $200 on some proper HDMI switching (none of that Amazon garbage that has always failed on me eventually), but I think there’s a good chance it could be part of a setup that performs as well as my current one does.

I’ve pre-ordered to get one at $500. If nothing else, I should be able to get all my money back when it retails for $750.
 
Everything in aviation is a trade off, and everyone draws their own line somewhere different. I don't think spending less automatically means flying unsafe, as long as you're actually looking at the risk and doing the homework rather than cutting corners just to save a buck.
 
I feel pretty certain that my LRP will die some day, a lot sooner than I’ll be able to afford another one, and the LumaHDR is like a tenth the price of a new LRP. There are many things to figure out and I’ll need to spend at least $200 on some proper HDMI switching (none of that Amazon garbage that has always failed on me eventually), but I think there’s a good chance it could be part of a setup that performs as well as my current one does.

I’ve pre-ordered to get one at $500. If nothing else, I should be able to get all my money back when it retails for $750.

Everything in aviation is a trade off, and everyone draws their own line somewhere different. I don't think spending less automatically means flying unsafe, as long as you're actually looking at the risk and doing the homework rather than cutting corners just to save a buck.

Excellent points. Okay, I'm in. Ordered.

Wasn't that easy? 😁

Also, I was catching up on the megathread and a couple of other points caught my eye. The promise of perfect lip-sync and automatic subtitle placement. That second is a real issue for me on watching subtitles on scope films from my AppleTV. I'd also like to see how it handles Project Hail Mary, which sometimes has optical flashy stuff in the black bars.

I guess I'll have a weekend where I test all these things and then I'll know for sure. I like to A/B test things and have my own opinion based on my own first-hand observations. Plus, like you and another poster above were saying, I'll end up making money on selling whichever VP loses the shootout.
 
One thing to keep in mind is for those considering comparing to or eventually replacing a Lumagen is that the new Luma is just 2 in and 2 out for HDMI. Similar to MadVR Envy, most Luma users will probably use it after their AVR/processor and something upstream from Luma would do HDMI switching.

I know Lumagen has lots of different options and many users use it for HDMI switching and then it feeds the AVR/processor.
 
Is Luma doing anything new that’s got you all interested?
It costs less than a tenth of the other two available options. I think that´s the main USP right from the beginning and mentioned in your screen shot.
As a long term madVR supporter and dealer, I´m sceptical how all the promises will come true, but as an integrator of whole room solutions, I´m obviously interested in what´s going on in the market. If there´s an opportunity to safe client´s budget and spend it elsewhere, I´m all in. As long as the quality is right.
So I´m waiting for the first real world tests to come in and then eventually get my own hands on it for testing.
 
That AVS thread is nuts with the sheer number of requests/promises being made. Luckily, a lot of the really hard engineering work is taken care of by using libplacebo and having HDFury handle the hardware side of things.

Form my point of view as long as it can handle the core functions I use my Lumagen for (aspect ratio management for scope screen and tone mapping) and pass through 4k/120Hz for gaming it is a win in my book and probably for most of the market as well.
 
Back
Top