• Thanks for visiting the Kaleidescape Owners' Forum

    This forum is for the community of Kaleidescape owners, and others interested in learning about the system, equipment, services, and the company itself.

    It is run by a group of enthusiastic Kaleidescape owners and dealers purely as a service to this community.

    This board is not affiliated in any way with Kaleidescape, Inc.
    For official technical support, product information, or customer service, please visit www.kaleidescape.com

  • You are currently in "Guest" mode and not logged in with a registered account.

    The forum is free to use and most of the forum can be used by guests who are not registered....

    ... but we strongly encourage you to register for a full account. There is no cost to register for a full account.

    Benefits of registering for a full account:

    • Participate in the discussions! You must have a registered account to make posts on the forums. You will be able to start your own thread on a topic or question, or you can reply to other threads/discussions.
    • Use the "Conversation" feature (known as "private messaging" on other forums) to communicate directly with any of the other users here.
    • Access the Files area. The "resources" area of the forum contains many "Favorite Scene" and Script files that can dramatically increase the enjoyment of your Kaleidescape system. Go directly to great scenes in your favorite movies, created by other owners, and add automation to playback of your system with Scripts.
    • You won't see this annoying notice at the top of every screen!😊

    It's easy and free to register for the forum. Just click the "Register" button in the upper right corner of this page, and follow the instructions there.

Lumagen Lock mode for Auto Aspect and Scope OSD with Strato

KDeering

KDeering

Well-known member
Hello All. I had Lumagen add a new feature to their Auto Aspect functionality that is directly related to the Kaleidescape. I was hearing complaints that the auto aspect function wasn't working that well with the 2.35 version of the OSD, especially with the LIST style view of movies. This has to do with the way that menu looks to the Lumagen. Now in the auto aspect setup there is a new selection that refers to using the graphics flag. If you go into the Strato advanced menu (in IP video menu) and enable the metadata in the advanced menu to ON and set the graphics flag to ON in the Lumagen auto aspect section of that input, it will assume you are using the scope OSD setup and will now LOCK to 2.35 for the OSD regardless so no chance of it messing up. Hope this helps those that have had finnicky issues with this!
 
Hi Kris,
I have a Stewart 16:99 screen with 4 way masking that I can control with a IR signal. Can the Lumagen control the Stewart masking with this Auto Aspect ratio feature when using the Strato?
 
Nelson10 said:
Hi Kris,
I have a Stewart 16:99 screen with 4 way masking that I can control with a IR signal. Can the Lumagen control the Stewart masking with this Auto Aspect ratio feature when using the Strato?
Click to expand...
You need some type of control system (eg Crestron) that can obtain the needed info from your Strato and Lumagen and take the appropriate actions…. SJ
 
You must log in or register to reply here.
Back
Top