• Thanks for visiting the Kaleidescape Owners' Forum

    This forum is for the community of Kaleidescape owners, and others interested in learning about the system, equipment, services, and the company itself.

    It is run by a group of enthusiastic Kaleidescape owners and dealers purely as a service to this community.

    This board is not affiliated in any way with Kaleidescape, Inc.
    For official technical support, product information, or customer service, please visit www.kaleidescape.com

  • You are currently in "Guest" mode and not logged in with a registered account.

    The forum is free to use and most of the forum can be used by guests who are not registered....

    ... but we strongly encourage you to register for a full account. There is no cost to register for a full account.

    Benefits of registering for a full account:

    • Participate in the discussions! You must have a registered account to make posts on the forums. You will be able to start your own thread on a topic or question, or you can reply to other threads/discussions.
    • Use the "Conversation" feature (known as "private messaging" on other forums) to communicate directly with any of the other users here.
    • Access the Files area. The "resources" area of the forum contains many "Favorite Scene" and Script files that can dramatically increase the enjoyment of your Kaleidescape system. Go directly to great scenes in your favorite movies, created by other owners, and add automation to playback of your system with Scripts.
    • You won't see this annoying notice at the top of every screen!😊

    It's easy and free to register for the forum. Just click the "Register" button in the upper right corner of this page, and follow the instructions there.

Need screw size for bottom of Strato that attaches rack mount kit

iansilv

Well-known member
Anyone know the size of these screws?:
 

Attachments

  • 68535A6E-50DC-4569-8995-EA87B76779E9.jpg
    68535A6E-50DC-4569-8995-EA87B76779E9.jpg
    244.6 KB · Views: 24
  • F5921DBF-892D-4BF2-9D4E-5ACF9F4FB4BD.jpg
    F5921DBF-892D-4BF2-9D4E-5ACF9F4FB4BD.jpg
    238.2 KB · Views: 23
Anyone know the size of these screws?:

I do! I do! :)

It's an M3 x 10mm Phillips flat head stainless steel machine screw.

Full specs from our BOM:
Type: Machine Screw
Diameter: M3
Length: 10mm
Thread Size: 0.5
Drive: Phillips
Head: Flat
Material: Stainless Steel
Finish: None
Mech Standard: DIN 965
Other Standard: RoHS Compliant, UNSPSC 31161504
 
^^
Nice! Should be easy enough to find at your local hardware store I would assume. That or a proper computer/networking/electronics supply store.
 
I have found that the local Ace hardware has a surprisingly good assortment of hardware including little metric screws like this. It might be worth a visit if you have one near by.
 
Back
Top