• Thanks for visiting the Kaleidescape Owners' Forum

    This forum is for the community of Kaleidescape owners, and others interested in learning about the system, equipment, services, and the company itself.

    It is run by a group of enthusiastic Kaleidescape owners and dealers purely as a service to this community.

    This board is not affiliated in any way with Kaleidescape, Inc.
    For official technical support, product information, or customer service, please visit www.kaleidescape.com

  • You are currently in "Guest" mode and not logged in with a registered account.

    The forum is free to use and most of the forum can be used by guests who are not registered....

    ... but we strongly encourage you to register for a full account. There is no cost to register for a full account.

    Benefits of registering for a full account:

    • Participate in the discussions! You must have a registered account to make posts on the forums. You will be able to start your own thread on a topic or question, or you can reply to other threads/discussions.
    • Use the "Conversation" feature (known as "private messaging" on other forums) to communicate directly with any of the other users here.
    • Access the Files area. The "resources" area of the forum contains many "Favorite Scene" and Script files that can dramatically increase the enjoyment of your Kaleidescape system. Go directly to great scenes in your favorite movies, created by other owners, and add automation to playback of your system with Scripts.
    • You won't see this annoying notice at the top of every screen!😊

    It's easy and free to register for the forum. Just click the "Register" button in the upper right corner of this page, and follow the instructions there.

Lumagen HDCP problems

Andoreaw

Member
Hello I have a problem with an pld Lumagen XS processor.
I disabled the HDCP protocol on the HDMI output 1 and 2 by pressing Menu - 9081 and Menu 9082 on the remote, but now I get no picture with a HDCP enable source .
On the Lumagen website etc I only found the method to disable the HDCP on the outputs on the Lumagen, but I don’ t understand how to re-enable it.
Do you know how to turn the HDCP on again… ? Thank you.
 
Hello I have a problem with an pld Lumagen XS processor.
I disabled the HDCP protocol on the HDMI output 1 and 2 by pressing Menu - 9081 and Menu 9082 on the remote, but now I get no picture with a HDCP enable source .
On the Lumagen website etc I only found the method to disable the HDCP on the outputs on the Lumagen, but I don’ t understand how to re-enable it.
Do you know how to turn the HDCP on again… ? Thank you.
Did you save after? If not, maybe power off and on again. You can use Menu 0998 for resetting output defaults or menu 0999 for factory default. Also, you can load a backup copy into the unit if you saved one. I would contact support and get the best answer. SJ
 
Hello I tried resetting to factory defaults but didn’ t solve the problem, I will try Menu 0998 later will see if it resolves… Totally absurd that there is a code to disable HDCP but not to re enable it… I have cpmtacted the Lumagen support, hope they will help…
 
Back
Top