My k server and vault are in a rack at the back of my media room. I found that even with the front panel LEDs set to 4, the blue glow was distracting while watching a movie when the scene was very dark. To fix this, I made a linux shell script so my openhab home automation controller could turn the lights on the k off when the room lights went off and back on when the movie was over.
I did this by using the 'wget' command line http client to connect to the k's web interface and update the configuration settings. To use the script, you will need 'wget' available on your path and you will need to update the configuration variables in the script for your k's server IP address and serial numbers.
then call the script like this:
./k_lights.sh N
where N is a number from 0 to 14 to indicate the desired brightness
Now I should also mention the normal disclaimers that there is no warranty for this code. And I am not responsible for anything that happens from using it. So there.
I did this by using the 'wget' command line http client to connect to the k's web interface and update the configuration settings. To use the script, you will need 'wget' available on your path and you will need to update the configuration variables in the script for your k's server IP address and serial numbers.
then call the script like this:
./k_lights.sh N
where N is a number from 0 to 14 to indicate the desired brightness
Now I should also mention the normal disclaimers that there is no warranty for this code. And I am not responsible for anything that happens from using it. So there.