• Thanks for visiting the Kaleidescape Owners' Forum

    This forum is for the community of Kaleidescape owners, and others interested in learning about the system, equipment, services, and the company itself.

    It is run by a group of enthusiastic Kaleidescape owners and dealers purely as a service to this community.

    This board is not affiliated in any way with Kaleidescape, Inc.
    For official technical support, product information, or customer service, please visit www.kaleidescape.com

  • You are currently in "Guest" mode and not logged in with a registered account.

    The forum is free to use and most of the forum can be used by guests who are not registered....

    ... but we strongly encourage you to register for a full account. There is no cost to register for a full account.

    Benefits of registering for a full account:

    • Participate in the discussions! You must have a registered account to make posts on the forums. You will be able to start your own thread on a topic or question, or you can reply to other threads/discussions.
    • Use the "Conversation" feature (known as "private messaging" on other forums) to communicate directly with any of the other users here.
    • Access the Files area. The "resources" area of the forum contains many "Favorite Scene" and Script files that can dramatically increase the enjoyment of your Kaleidescape system. Go directly to great scenes in your favorite movies, created by other owners, and add automation to playback of your system with Scripts.
    • You won't see this annoying notice at the top of every screen!😊

    It's easy and free to register for the forum. Just click the "Register" button in the upper right corner of this page, and follow the instructions there.

1U face/bezel broken clips

AlienWarlock

Well-known member
⭐️ Premium ⭐️
I acquired another 1U with a bad power supply. It runs now but the remaining problem is that all of the rataining clips are broken on the bezel so it won't stay on. It looks like the clips are riveted to the metal mesh piece on the back side of the bezel. Is this piece available in a repair kit? Or do you have to buy the whole bezel?
 

cinelife

Administrator
Staff member
Forum Administrator
Moderator
⭐️⭐️ Patron ⭐️⭐️
Authorized Kaleidescape Dealer
SPR-0015KSERVER-1500 Front Bezel Assembly

Yes, you would buy the whole assembly, $330 from K. Not sure how long they will be available, but they have a few in inventory and are currently still listed on the dealer price sheet. I would also confirm that the SPR-0015 is what you need before ordering. There are only a few repair parts available for the 1U (the Bezel assembly noted, the Pogo board, and rack mount kit, that's it, and when they're gone, they're gone).

Jim
 

AlienWarlock

Well-known member
⭐️ Premium ⭐️
Thanks Jim. Its good to know that a few are still available. But the price is a pretty good percentage of what I have invested in this unit. Since I'm stuck at home I might just try to invent some replacement clips. Does anyone have a 3d printer 😉

And inquiring minds need to know what the Pogo board is...
 

baltz

Well-known member
⭐️ Premium ⭐️
 

AlienWarlock

Well-known member
⭐️ Premium ⭐️
Well that makes it much easier! I just sent one off to be duplicated yesterday. I should have done a little searching first and I could have saved that step :)

Thanks @cmw for making the file!
 

cinelife

Administrator
Staff member
Forum Administrator
Moderator
⭐️⭐️ Patron ⭐️⭐️
Authorized Kaleidescape Dealer
If there's a way, cmw will find it, very smart guy!

Jim
 

cinelife

Administrator
Staff member
Forum Administrator
Moderator
⭐️⭐️ Patron ⭐️⭐️
Authorized Kaleidescape Dealer
Sorry guys, here is the Pogo Board answer:

The POGO board on a 1U server is the connector on the bottom right with the gold pins that touch the faceplate for power/light, etc.

It's easy to change, it pops right out and there is a cable connected to the rear.

(From K Support)

Jim
 
Top